Coupler Lateral Pulls Testing Device MLT-CL2

Product Information:
This device is according to the IEC 60320-1, figure 19 standard requirement to design. It is used for the testing of withdrawing appliance inlet under the conditions of the connector with force, for this reason to test the mechanical strength of the connector.

Technical Parameters:

• Flexible cable bending height: 40±2 mm, adjustable.
• Pull range: 0-100N.
• Pull way: Manual operation, 50 times in one direction and then 50 times in the opposite direction.
• Conductor Selection and the corresponding test lateral pulls value table

Table 7 - Values for the lateral pulls applied

Rated current of connector A Pull N
2,5 6
6 35
10 35
16 50

Coupler Lateral Pulls Testing Device MLT-CL2