MT 72X Power Frequency Voltage Withstand Tester (5 kV)

General introduction
Proceed comprehensive test and analysis to the insulating Level and dielectric strength of various appliances. High voltage ,lower current,accurate, leakage current, continuously and arbitrarily set test time,strong adaptation. At the same time showing the actual measured values (time, voltage, current showing at the same time), unqualified audible and visual alarm manual and remote control test.

MODEL MT 72X
ACW Output voltage (0.00~5.00)kV
Max. output power 500VA
Max. current 100mA
Current range 2mA、20mA、100mA
Output waveform sine wave
Waveform distortion ≤5%
Test time 0.0s~999s  0.0= continue
DCW Output voltage (0.00~5.00)kV
Max. output power 100VA
Max. current 20mA
Ripple factor ≤5%
Test time 0.0s~999s 0= continue
Range (0.00~50.00)kV
Volt meter Accuracy ±(5%+5 words )
Resolution 10V
Displayed value RMS
Measure Range AC 0.100mA ~ 100.0mA
Ampere meter Measure Range  0.100mA ~ 100.00mA
Resolution  2mA:1uA, 20mA:10uA,  50mA:0.1mA
Accuracy ±(5%+5 words )
Range 0.0s~999s
Timer Min. resolution 0.1s
  Accuracy ±(1%+50ms)
PLC interface YES
Remote interface   YES

 

MT 72X Power Frequency Voltage Withstand Tester (5 kV)