Screwed Glands Tester MLTSG-1

Product information:

The device is used to check screwed glands, and conform to the IEC60598-1 clause 4.12.5. Screwed glands shall be fitted with a cylindrical metal rod having a diameter equal to the nearest whole number of millimetres below the internal diameter of the packing. The glands shall then be tightened by means of a suitable spanner, the moment shown in following Table being applied to the spanner for 1 min.

Technical parameters:

1. Stainless steel rod: Ф5, Ф7, Ф9, Ф10, Ф12, Ф14, Ф16, Ф18, Ф20, Ф22, Ф25, Ф30, Ф32, Ф40mm each one;
2. Weight: 20,40,50,60 hook weights each one, 20N vias weight and 6N vias weight each one
3. Wheel diameter: 250mm, wood
4. Stainless steel rod diameter and torque test Optional Table 1

Test rod diameter /mm Metal gland(N.m) MoldingMaterial gland(N.m)
<7 6,25 2,5
7~14 6,25 3,25
14~20 7,5 5
>20 10 7,5

5. Weights collocation Table 2

Gland torque(N.m) Weights collocation
2,5 20N with hook
3,25 20N with hook+6N vias
5 40N with hook
6,25 50N with hook
7,5 60N with hook
10 60N with hook+20N vias