Test Probe with Force MLT-I9020, MLT-I9021

 

Product information:

These two test probe separately confirm to the IEC60884-1 figure 9 and figure 10.The MLT-I20 test probe with 20N force is used to test whether the live parts inside can be touched. The MLT-I21 test probe with 1N force is for testing whether the live parts with the protection of socket can be touched.

Application method:

Touching the specimen with the end of the probe and then respectively exert the force of 20N or 1N until the probe is bulged and the A-A surface is abreast with the B-B surface.

 

Technical parameters:

Test probe MLT-I20:the probe: 3+0.03 0×1+0.015 0 ×80±0.5(3mm width, 1mm thickness, 80mm±0.5 length); the diameter of the round: R0.2±0.05,with 20N force.
Test probe MLT-I21:the probe: Φ1+0.015 0 ×80±0.5; the diameter of the round: R0.05,with 1N force.

Test Probe with Force MLT-I9020, MLT-I9021