Product information:
The test device is suitable for sealing parts and enclosure’s sand and dust resistance capacity testing of the electrical and electronic products, car and motorcycles spare parts and seals. In order to detect the use, storage, transport performance of the electrical and electronic products, car and motorcycles spare parts and seals under the sand and dust environment.
The inner of the test equipment is made of high quality SUS304 stainless steel, the enclosure is with cold-rolled steel electrostatic spray. And it is also has large observation window and manual wiper device. The security protection is good.
The test equipment uses intelligent digital temperature controller, humanized operation design, and different grades of meter operation functions are compatible. The input with digital calibration system, built-in common thermocouples and RTD nonlinear correction form, measurement is accuracy and stability. With position adjustment and AI adjustment function,
0.2 precision, multi-alarm mode.
The sand and dust test chamber is designed and manufactured according to IEC60598-1.
Function parameters:
Model | MLTDC-2 | ||
Working size(mm) | Can be customized | ||
(1.800×800×800mm | |||
2.800×1000×1000mm | |||
3.1000×1000×1000mm | |||
4.1000×1500×1000mm | |||
5. 1200×1400×1200mm) | |||
Main technical parameters | Temperature range | Room temperature | |
Test dust | dry talc which can go through the sieve of | ||
75μm and the square sieve of wire diameter 50μm. | |||
Dust way | Flow Dust and floating dust, in the upper part of test chamber side mounted a sand | ||
and dust outlet, blowing the dust which is in the sand and dust funnel into the | |||
laboratory by dust blower blowing , then carry on the testing. | |||
Sand and dust concentration | 2~4kg/m3 | ||
Air flow speed | ≤2m/s | ||
Blowing sand time | 1S~99H adjustable | ||
Vibration hit Time | 1S~99H adjustable | ||
Timing range | 0~99H | ||
Vacuum | Exhaust flow (0 ~ 6)L/min , , Pressure | ||
(negative pressure):0~2kpa |
Product main configuration
Device Name | Dust and Sand Test Chamber | ||
Main configuration | Cabinet | Enclosure material | Cold-rolled steel plate electrostatic spray |
Inner material | SUS304B Stainless steel | ||
Sample holder | Stainless steel | ||
Observation window | large observation window in the middle of the door, a 9W fluorescent lamp | ||
Heating tube | Stainless steel finned heating tube | ||
Electrical control system | Controller | Intelligent digital control instrument | |
AC contactor | Siemens | ||
Solid State | Gute (Made in China) | ||
Relays | |||
Time Relay | Made in China | ||
Intermediate relay | Omron | ||
DustSystem | Fan | Made in China | |
Dust box | Stainless steel | ||
Vibration motor | Made in China | ||
Vacuum pump | Made in China | ||
SecurityProtectionDevice | Power overload, short-circuit protection | ||
Ground Protection | |||
Voltage Protection | |||
Motor phase loss protection | |||
Alarm beep prompt |