This tester conforms to the standard requirement of VDE 0620, IEC 60068-2-32, EN 50075, and UL 60730. It is used to check the drop resistance of electrical accessories. The falling times can be preset. The device stops working automatically when the preset times are reached.
Technical parameters:
Model | MLT-TB1 | MLT-TB2 |
Power Supply | 220V 50Hz or 115V 60Hz | 220V 50Hz or 115V 60Hz |
Speed of rotation | 5 r/min | 5 r/min |
Falling times | 10 times/min | 10 times/min |
counter | 0~9999 | 0~9999 |
Material | 3 mm steel | 3 mm steel and Block of wood and plastics laminated sheet |
Height | 650 mm | 675 mm(or 1175) |
Dimension | W*D*H=630 mm x 1250 mm x 600 mm | W*D*H=630 mm x 600 mm x 1250 mm |
Chute Length | 275 mm | 275 mm |
Conforms to standard | VDE0620.1 & IEC 60598-1 | IEC 60068-2-32, IEC 60884-1, |
EN 50075 |
Model | MLTB-3 | MLTB-4 |
Power Supply | 220V 50Hz or 115V 60Hz | 220V 50Hz or 115V 60Hz |
Speed of rotation | 5 r/min | 5 r/min |
Feel times | 10 times/min | 10 times/min |
counter | 0~9999 | 0~9999 |
Material | 19 mm nominal thick blockboard | 5 mm steel and hard wooden plate |
Height | 650 mm | 1070 mm |
Dimension | W*D*H=630mm x 600mm x 1250mm | W*D*H=630mm x 600mm x 1450mm |
Chute Length | 275mm | 275mm |
Conforms to Standard | BS1363.1 UL60730 | IEC 60312 |